TITAN car carrier has been completed this week, and the factory has been packed on June 16 ready to be shipped to Sudan. Customers found us on facebook. The customer later stated that he had followed us before because he had seen our lowbed semi trailer.

Titan can customize a suitable semi-trailer according to customer requirements, so this is why our customers find us.This customer is operating a transportation company, and as the company expands, so does the customer's needs. So the customer asked us about the semi-trailer.

Here are some main structure of transport car,can help you learn it.

The structure of the car is generally divided into a lower chassis, an upper chassis, side panels, front panels, rear doors, top panels, accessories, hydraulic system, suspension system, air brake system, circuit system, support device, wheel cooling system, etc. 

1.The car is a double-layer loading platform structure. The upper loading platform can be lifted up and down under the action of the lifting device to facilitate loading. The lifting device is configured according to different needs, and can be divided into three types: hydraulic cylinder direct lifting type, pulley wire rope pulling lifting type and hand hoist hanging type.

2.About the underframe mask. The bottom frame is equipped with a mask in the middle, and the towing pin (towing vehicle tire)

And under the perforated plate at the rear axle. The lower chassis and the rest of the upper chassis are not masked.

3.For the two-axle single-tire car, there are 1 left and right manual springboards at the gooseneck step at the front end of the lower chassis, and a pumping ladder and a climbing ladder at the rear end. The rear end of the rear upper chassis is designed with a pumping ladder. 

4.In order to prevent the jumping of the upper chassis, a rope tightener is provided to pull the upper chassis and the lower chassis.

This kind of semi trailer was designed with lots of advantages and features. If you want to get more information, please don't hesitate to make contact with us.