Since 2014
Ten Years of Reliability Your Trusted Partner

Customer Feedback

40CBM Bulker Cement Tanker Trailer will be sent to Indonesia

40CBM Bulker Cement Tanker Trailer for Sale In Indonesia40CBM Bulker Cement Tanker Trailer for Sale In Indonesia

The TITAN 40CBM bulker cement tanker trailer ordered by Indonesian customers has completed all tests and will be sent to Manyar port in a few days.

This is not the first time that Indonesian customers have purchased bulker cement tanker trailers from TITAN. In June last year, an Indonesian customer purchased a 35cbm cement tanker trailer from TITAN. After using it for half a year, the customer especially gave us feedback that the TITAN bulker cement tanker trailer is of better quality than the one purchased by the customer before and does not require frequent maintenance.

Therefore, the customer had a new transportation demand this time, and immediately found the sales manager Annie. He needed to buy the bulker cement tanker again.

After consulting the customer's specific requirements, he quickly gave a specific production plan and upgraded the capacity to meet the customer's needs. need. The customer was very satisfied, so he placed an order for this 40cbm bulker cement tanker trailer.

40CBM Bulker Cement Tanker Trailer for Sale In Indonesia40CBM Bulker Cement Tanker Trailer for Sale In Indonesia

40CBM bulker cement tanker trailer maintenance and maintenance

Car chassis: according to the provisions of the selected car chassis instruction manual.

Air compressor: Follow the air compressor manual.

Power take-off: Always pay attention to regularly check its lubrication and operating conditions. If there is abnormal noise, find out the cause and eliminate it in time. Check the gear engagement and wear once a year, and do not run at Overspeed.

Air circuit: Check the sealing condition frequently, and remove air leakage in time; check the working condition of each valve frequently, if it fails, it should be repaired or replaced; the safety valve is guaranteed to be opened when the pressure is 0.2Mpa, and the pressure in the tank must not exceed 0.2 Mpa.

Tank body: Regularly check whether the welding seam of the 40CBM bulker cement tanker trailer has air leakage. If such a phenomenon is found, repair welding should be carried out in time.

Tank air chamber: Check the air chamber canvas frequently. If it is damp, airtight or damaged, it should be replaced in time; check whether the air chamber layer is compacted. If there is air leakage, it will affect the discharge effect and should be eliminated in time.

40CBM Bulker Cement Tanker Trailer for Sale In Indonesia40CBM Bulker Cement Tanker Trailer for Sale In Indonesia

40CBM bulker cement tanker trailer unloading safety operation rules

Each time before opening the feed port, the pressure relief valve and the air inlet pipe ball valve must be opened first, and the material cover should be opened after the residual gas in the tank is removed, so as to avoid injury accidents.

Always pay attention to whether the pressure gauge is working normally, and strictly prevent the pressure gauge from malfunctioning and overpressure, which may cause the 40CBM bulker cement tanker trailer tank to burst and leak.

Always check the safety valve to ensure that the pressure is released at 0.2Mpa, and the pressure inside the 40CBM bulker cement tanker trailer must not exceed 0.2Mpa.

Always check whether the running table is working properly, so as not to damage the air compressor and power take-off due to overturning.

Always listen to the rotating sound of the power take-off and air compressor. If there is any abnormal sound, stop the machine immediately to troubleshoot.

40CBM Bulker Cement Tanker Trailer for Sale In Indonesia40CBM Bulker Cement Tanker Trailer for Sale In Indonesia

40CBM bulker cement tanker trailer unloading steps

Before unloading, check whether the unloading butterfly valve, external air source interface, exhaust valve and two feed ports are closed and tightened. If they are not tightened, they must be tightened first to prevent air leakage;

Start the engine and shift the transmission to neutral while depressing the clutch pedal to completely separate the transmission from the engine;

Turn on the power take-off solenoid valve switch, and at the same time slowly release the clutch pedal to make the air compressor rotate;

Adjust the handle of the control mechanism, adjust the air compressor speed to about 900r/min, and stabilize it;

When the pressure reaches 0.18MPa, first open the auxiliary blowing pipe, then open the discharge disc valve of the front and rear bins to start discharging, and then the pointer of the bulker cement tanker trailer air compressor will stabilize to a certain value.

When the air pressure drops to 0.04Mpa, the rear compartment has been unloaded, close the blowing aid pipe, open and close the butterfly valve of the rear compartment several times, and then close the butterfly valve of the rear compartment and the intake valve of the rear compartment, that is, only the front compartment is unloaded. The pressure will rise and stabilize to a certain value;

When the pressure of the barometer reaches 0MPa, the unloading is completed, close the air compressor (close the power take-off switch), and close the unloading butterfly valve.

40CBM Bulker Cement Tanker Trailer for Sale In Indonesia40CBM Bulker Cement Tanker Trailer for Sale In Indonesia

You can learn about different types of bulk cement tanker trailers, such as 3 axle dry bulk tanker trailer, 30-ton fly ash tanker, 50cbm silo trailer for sale, and process, testing, packaging and customer feedback, etc.

 

This kind of semi trailer was designed with lots of advantages and features. If you want to get more information, please don't hesitate to make contact with us.

Feedback

whatsapp
chat